Pietra Grey presents a dark graphite background with fine, low-contrast white veining. The understated stone look works across modern offices, hotels, bathrooms, retail environments, corridors and residential interiors where buyers want a neutral dark finish rather than a dramatic black surface. It coordinates easily with light marble, timber and metal colors, which makes it practical for multi-pattern project packages. The 1220 mm width and selectable thicknesses support both distributor stock programs and project-specific orders.
Overview
Pietra Grey Color and Vein Detail
The Pietra Grey UV marble sheet combines a dark grey marble-look background with contrasting white veining for decorative interior walls. When selecting a grey UV sheet, compare the background tone, vein distribution and surface finish with the surrounding wall colors, flooring and furniture.
Check the Grey Tone Under Your Lighting
The appearance of a dark grey UV sheet can vary with lighting, viewing angle and nearby materials. Review a physical sample under both daylight and the artificial lighting planned for the room. Use product photographs for initial selection, then confirm the actual grey colour and finish before ordering.
Review Vein Direction and Pattern Repeat
Check a full-sheet photograph as well as a close-up. A small sample can show the color and finish, but it may not represent the complete vein layout or pattern repeat.
For walls using several sheets, compare the vein direction and distribution across adjoining panels. Do not assume that the pattern will continue seamlessly or form a bookmatched design unless this arrangement has been specifically confirmed.
Confirm Samples for Your Order
Keep a reference to the approved design code and sample when confirming the order. For larger projects or later repeat purchases, request confirmation of the available production batch and compare the supplied finish with the approved reference before installation.
Specifications
Sheet SpecificationsConfirm the specification for the selected Pietra Grey UV marble sheet before ordering. The quotation and product specification should identify the design code, sheet dimensions, thickness, weight and surface finish.
- Design: Pietra Grey marble-look pattern, confirmed against the approved sample.
- Sheet dimensions: Check the available width and length against the wall layout and cutting plan.
- Thickness and weight: Confirm the values for the selected specification.
- Surface finish: Review the actual sheen and decorative detail using a sample.
- Pattern layout: Confirm vein direction, repeat and any matching requirements.
- Installation details: Check the suitable substrate, adhesive, joint treatment and finishing trims.
The UV designation refers to the surface-curing process. It should not be treated as confirmation of outdoor weather resistance or suitability for prolonged sunlight exposure. Select this product according to its confirmed application and performance information.
| Base Material | PVC and calcium-carbonate composite |
| Surface Structure | Decorative film plus UV-coated protective finish |
| Standard Width | 1.22 m / 1220 mm |
| Available Lengths | 2.4 m, 2.6 m, 2.8 m and 2.9 m; selected 4-6 mm sheets at 2.44 m |
| Available Thicknesses | 2.0-3.0 mm in listed combinations; selected 4, 5 and 6 mm options |
| Dimensional Tolerance | Thickness tolerance shown in the supplied schedule: ±0.02 mm |
| Color & Batch | Approve physical sample and batch standard before mass production |
Loading quantities vary by thickness, length, packing method and final order mix. Use the loading reference table below for preliminary planning; confirm the final container plan in the proforma invoice.
Interior Wall Applications
Pietra Grey can be considered for interior feature walls, reception backdrops, living-room TV walls and selected hospitality or retail interiors. Its dark grey background provides a contrast with lighter surrounding finishes, while the white veining introduces decorative detail across the wall.
Plan the Sheet Layout Before Cutting
Measure the wall and mark the positions of corners, sockets, fixtures and other openings. Review the proposed sheet arrangement before cutting so that prominent veins, joints and narrow edge pieces are positioned intentionally.
Where possible, lay out adjoining sheets and identify their installation sequence. Check the pattern at the intended viewing distance as well as close up.
Check Joints and Edge Finishes
Confirm the joint treatment and matching trims for the selected panel system. Follow the applicable installation instructions for substrate preparation, adhesive selection and any required movement allowance.
For bathrooms or areas exposed to water, confirm the suitability of the complete wall system. The panel surface alone does not establish that the substrate, joints, edges and openings form a waterproof installation.
Compare Other Marble-Look Colors
To compare Pietra Grey with lighter backgrounds or other vein patterns, browse our UV marble sheet collection. Select your preferred designs and request samples to review the colors together before confirming a project order.
OEM & Projects
We support B2B procurement for distributors, importers, contractors, developers and private-label building-material brands. Send the target pattern, thickness, length, quantity and destination port so our team can prepare a practical quotation and loading proposal.
- Pattern selection: choose from available designs or discuss color/pattern development for volume programs.
- Sample approval: confirm color, veining, gloss and surface appearance before bulk production.
- Project matching: combine several patterns and specifications for hotels, apartments, offices or retail programs, subject to MOQ.
- Private label: discuss carton marks, labels, barcodes, protective film and customer branding before quotation.
- Quality control: dimensional, surface, color and packing checks can be documented with inspection photos or agreed reports.
- Quotation data required: product code/pattern, size, thickness, quantity, destination, Incoterm and required delivery date.
Packing & Delivery
Packing and shipment are planned around the selected thickness, sheet length, pallet quantity and destination requirements. Standard protection can include surface film and reinforced export packing, while pallet structure, marks and private-label details are confirmed before production. Container-loading photos and shipping documents can be supplied according to the agreed order process.
- Export packing: confirm sheet protection, pallet/carton method, edge protection and marks in the quotation.
- Container planning: 20GP reference quantities are listed below; actual loading may change with packing and mixed specifications.
- Lead time: calculated after pattern, quantity, deposit, artwork and sample approval are confirmed.
- Trade documents: commercial invoice, packing list and bill of lading; additional certificates/documents subject to availability and order agreement.
- Inspection: buyers may request production or loading photos, pre-shipment inspection or third-party inspection before dispatch.
